NodOut
On/Off AM
Pulse
Pulse modulation is accepted from an external
source at the PULSE connector. In addition,
pulse modulation can also be internally generated.
The pulse is adjustable in standard swept signal
generators with 1.0 ps resolution. Swept signal
generators can also produce a 27.778 kHz square
wave for use with HP scalar network analyzers.
Swept signal generators with Option 002 generate
a synthesized pulse that is adjustable with 25 ns
resolution.
Additional information is available under “Modulation”, or refer to
the type of modulation by name (AM, FM, Pulse).
See Also
“Modulation”
ModOut
On/Off
AM
Function Group
(MOD)
Menu Map
4
Description
This softkey (Option 002 only) lets you output the
internally-
generated amplitude modulation waveforms to the rear panel
AM/FM OUTPUT connector. When scaled linearly at
100%/V,
the
maximum output voltage is
+l
V and the minimum output voltage is
-1 v.
Programming Codes
See Also
SCPI:
MODulation:OUTput:SOURce AM
MODulation:OUTput:STATe
ONlOFFlllO
Analyzer:
NONE
(MOD, also see “AM” and “Modulation”.
Operating and Programming Reference
M-l 1
To Next Page
Loading...
Need help?
General
