HP 8360 B Series User Manual

Internal Pulse Mode Gate
Programming Codes
SCPI: PULM:INTernal:WIDTh <num>[time suffix]lMAXimumJMINimum
Analyzer: NONE
See Also 0, 1
MOD a so see “Pulse” and “Modulation”.
Internal Pulse Mode Auto
Function Group (MOD_)
Menu Map 4
Description
This softkey (Option 002 only) is the default mode of generating
internal pulses. It is not synchronized to any trigger signal. An
asterisk next to the key label indicated that this mode is selected.
Programming Codes
SCPI: PULM:INTernal:TRIGger:SOURce INTernal
Analyzer: NONE
See Also 0, 1
MOD
a so see “Pulse” and “Modulation”.
Internal Pulse Mode Gate
Function Group (MOD_)
Menu Map 4
Description
This softkey (Option 002 only) logically “ANDs” the internal pulse
generator with a gating signal supplied from an external source.
Programming Codes
SCPI:
PULM:INTernal:GATE ONlOFFlllO
PULM:INTernal:TRIGger:SOURce INTernal
Analyzer: NONE
See Also
m), also see “Pulse” and “Modulation”.
Operating and Programming Reference
I-1 1

HP 8360 B Series Specifications

General

Brand	HP
Model	8360 B Series
Category	Portable Generator
Language	English