Pwr
Mtr
Range
Function Group
TALC)
Menu Map
1
Description
This softkey lets you specify a range of operation
(from
+20
to -60
dBm)
for an external power meter, when a power
meter is used to level power externally. The factory preset value is
0
dBm.
The value specified for Pwr Mtr Range directly affects the
power level range for power meter leveling points. When this feature
is active, its current value is displayed in the active entry area.
Programming Codes
SCPI: POWer:RANGe <num>[power suffix]]MAXimum]MINimum
Analyzer: NONE
See Also
Leveling Point
PwrMtr
“Optimizing Swept Signal Generator Performance” in Chapter 1
P-24 Operating and Programming Reference
To Next Page
Loading...
