HP 8360 B Series User Manual

R
(RECALL]
Function Group
Menu Map
Description
Programming Codes
See Also
SYSTEM
8
This hardkey retrieves a front panel setting that was previously
stored in a SAVE register (1 through 8).
SCPI: *RCL <num>
The above is an IEEE 488.2 common command.
Analyzer: RCn, where n= a numeric value from 0 to 9.
m), SCPI COMMAND SUMMARY
“Saving and Recalling an Instrument State” in Chapter 1
“Programming Typical Measurements” in Chapter 1
Ref Dsc Menu
Function Group
SYSTEM
Menu Map 8
Description
This softkey reveals the softkeys in the frequency standard menu.
IO MHz Freq Standard Auto
Automatically selects the frequency
standard to be used by the swept
signal generator.
10 MHz Freq Standard Extrnl Sets the swept signal generator
to accept an external frequency
standard as its reference.
10 MHz Freq Standard Intrnl Sets the swept signalgeneratorto
use its internal frequency standard
as its reference.
Operating and Programming Reference R-l

HP 8360 B Series Specifications

General

Brand	HP
Model	8360 B Series
Category	Portable Generator
Language	English