HP 8360 B Series User Manual

POWER (MENU)
Programming Codes
SCPI: NONE
Analyzer: NONE
See Also
Softkeys listed previously under this menu key, [ALC),
(FLTNESS ON/OFF), (POWER LEVEL), and (ON/OFF).
“Introducing the HP 8360 B-Series Swept Signal Generators” in
Chapter 1
“Getting Started Advanced” in Chapter 1
“Programming Typical Measurements” in Chapter 1
Power Offset
Function Group
POWER
Menu Map 5
Description
This softkey changes the mapping of absolute power parameters
on input to the swept signal generator. It does not change the RF
output produced by the swept signal generator. The equation used to
determine the displayed value is:
Entered or Displayed Power = Hardware Power (ALC) + Active Offset
Programming Codes
SCPI:
POWer:OFFset:STATe ONlOFFlljO
POWer:OFFset <num>[DB](MAXimum~MINimum~UP(DOWN
Analyzer: NONE
See Also [POWER LEVEL) and POWER [MENU].
P-6 Operating and Programming Reference

HP 8360 B Series Specifications

General

Brand	HP
Model	8360 B Series
Category	Portable Generator
Language	English