ffeter
On/ilff
AI4
Meter
Adrs
Function Group
Menu Map
Description
Programming Codes
See Also
SYSTEM
8
In cases where the swept signal generator is capable of acting as a
controller to an HP 437B power meter, this
softkey
enables you to set
the programming address of the power meter. The address value can
be set from 0 to 30, with the factory default address set at 13. The
address value is stored in non-volatile memory.
SCPI: DIAGnostics:INSTrument:PMETer:ADDRess <num>
Analyzer:
NONE
Adrss Menu
“Optimizing Swept Signal Generator Performance” in Chapter 1
Chapter 3
Meter
On/Off
AM
Function Group
Menu Map
Description
Programming Codes
See Also
INIOD)
4
This
softkey
(Option 002 only) lets you display the value of the depth
of the externally-generated amplitude modulation.
SCPI:
MEASure:AM?
Analyzer:
NONE
m),
also see “AM” and “Modulation”.
Operating and Programming Reference M-9
To Next Page
Loading...
