ENTRY KEYS
Enter
List
Offset
Function Group
Menu Map
Description
Programming Codes
See Also
FREQUENCY
2
This
softkey
lets you enter an offset value for a frequency in the
frequency list. A frequency point must be entered before a power
value can be accepted, otherwise the following error message appears:
ERROR: Must first enter a List Frequency.
The rotary knob and the up/down arrow keys let you scroll through
the frequency points available to change the default power values. An
asterisk next to the key label indicates that this feature is active.
SCPI: NONE, see List Menu
Analyzer:NONE
List Menu
“Optimizing Swept Signal Generator Performance” in Chapter 1
ENTRY
KEYS
Function Group
Menu Map
Description
See Also
NONE
NONE
The entry keys consist of, the numeric entry keys (0 through 9),
the decimal point key, the negative sign/backspace key, and the
terminator keys. These keys are active whenever the ENTRY
ON/OFF LED is lit.
ARROW KEYS, ROTARY KNOB
“Entry Area” in Chapter 1
Operating and Programming Reference E-5
To Next Page
Loading...
Need help?
General
