HP 8360 B Series User Manual

List Menu
Function Group
FREQUENCY
Menu Map 2
Description
This softkey allows access to the frequency list functions.
Auto Fill Incr
Auto Fill #Pts
Auto Fill Start
Auto Fill Stop
Delete Menu
Enter List
Dsell
Enter List Fxeq
Enter List Power
Global Dwell
Global Offset
Pt Trig Menu
Automatically creates a frequency list using the
user-specified increment value.
Automatically creates a frequency list
containing a user-specified number of points.
Allows the entry of a start frequency for the
frequency list.
Allows the entry of a stop frequency for the
frequency list.
Reveals the frequency list delete menu.
Allows the entry of a dwell time for a frequency
point in the frequency list.
Allows the entry of a frequency point into the
frequency list.
Allows the entry of an ALC output power
correction value for a frequency in the frequency
list.
Automatically sets the dwell time for all points
in the frequency list to a user-specified value.
Automatically sets the ALC output power
correction value for all points in the frequency
list to a user-specified value.
Reveals the frequency list in the point trigger
menu.
A frequency list consists of two or more frequency points. A
frequency point can be any frequency value within the specified
frequency range of the swept signal generator and must be entered
before a value for either ALC output power offset or dwell time is
accepted. The maximum number of frequency points in a frequency
list is 801.
Creating a Frequency List
There are two methods of constructing a frequency list:
1. Use the Enter List Fxeq softkey to begin entering frequency
points. The list will be generated in the order the values are
entered.
L-6 Operating and Programming Reference

HP 8360 B Series Specifications

General

Brand	HP
Model	8360 B Series
Category	Portable Generator
Language	English