FREQUENCY
@Ki--
FREQUENCY
[-)
Function Group
FREQUENCY
Menu Map
2
Description
This
hardkey
allows access to the frequency functions listed below.
CW/CF
Coupled
Freq Mult
Freq Offset
List Menu
Step Swp Menu
Up/Down Size CW
Up/Down Size Swept
zocim
When this feature is on, the center
frequency and the CW frequency is
kept equal. Changing either the center
frequency or the CW frequency causes the
other to change to the same value. An
asterisk next to the key label indicates that
this feature is active.
Sets the frequency multiplier value and
applies it to all frequency parameters.
Sets the frequency offset value and applies
it to all frequency parameters.
Displays the frequency list create/edit
soft keys.
Reveals the stepped frequency sweep edit
softkeys.
Sets the frequency step size in the CW
frequency mode.
Sets the frequency step size in the swept
frequency mode.
Places the swept signal generator in the
CF/AF
sweep mode, where the rotary
knob and numeric entry keys control CF,
and the up/down arrow keys control AF.
See Also
Softkeys listed above.
“Optimizing Swept Signal Generator Performance” in Chapter 1
Operating and Programming Reference F-17
To Next Page
Loading...
Need help?
General
