Doubler
Amp
Mode Off
Programming Codes
SCPI:
POWer:AMPLifier:STATE:AUTO
ONlOFFlOll
POWer:AMPLifier:STATE:AUTO?
Analyzer: NONE
See Also
Dblr Amp Menu
Doubler
Amp
Mode
Off
Function Group
POWER
Menu Map
c!
Description
This softkey is applicable to instrument models with a doubler
installed. The doubler has an integral amplifier whose operation is
controlled by the instrument firmware. This
softkey
turns off the
automatic mode of operation and turns off the amplifier so that it is
never used. This is an unspecified mode of operation since the output
power may not be at the maximum leveled output power specification
at frequencies generated in the doubled mode. This
softkey
has no
effect on instruments without a doubler.
An asterisk next to the key label indicates that this feature is active.
Programming Codes
SCPI:
POWer:AMPLifier:STATE
ONlOFFlOll
POWer:AMPLifier:STATE?
Analyzer: NONE
See Also
Dblr
Amp
Menu
Operating and Programming Reference D-9
To Next Page
Loading...
Need help?
General
