Freq Offset
Freq
Uffset
Function Group
FREQUENCY
Menu Map
2
Description
This
softkey
lets you set a frequency offset value and applies it to
all frequency parameters. The frequency offset ranges between and
including fllO.O GHz. Changing the frequency offset value changes
the display but does not affect the output frequency. Frequency
multiplier and offset are related as shown by the following equation:
Entered value
or
Displayed Frequency
=
(Frequency Generated x Multiplier) + Offset value
Programming Codes
See Also
The factory preset value is 0 Hz. An asterisk next to the key label
indicates that this feature is active.
SCPI:
FREQuency:OFFSet
<num>]MAXimum]MINimum
FREQuency:OFFSet:STATe ON]OFF]l]O
Analyzer: SHFB <n>[Hz]Kz]Mz]Gz]]
FREQUENCY
(MENU),
Freq Mult
Operating and Programming Reference F-19
To Next Page
Loading...
