HP 8360 B Series User Manual

H
HP-IB Address
To set the swept signal generator’s HP-IB address, refer to “Address”
in this manual.
HP-13 Menu
Function Group
SYSTEM
Menu Map 8
Description
This softkey reveals the softkeys in the HP-IB control menu.
Adrs Menu
Reveals the softkeys that
allow HP-IB addresses to be
changed.
Programming Language Analyzr
Sets analyzer as the external
interface language.
Programming Language CIIL
Sets CIIL as the external
interface language.
Programming Language SCPI
Sets SCPI as the external
interface language.
Three different programming languages are available:
n SCPI, Standard Commands for Programmable Instruments,
is the instrument control programming language developed by
Hewlett-Packard to conform to the IEEE 488.2 standard (replacing
IEEE 728-1982). The IEEE 488.2 standard provides codes,
formats, protocols, and common commands that were unavailable
in the previous standard.
n Analyzer is the programming language compatible with the
HP 8340/41 synthesized sweepers system language and many
network analyzers.
n CIIL, Control Interface Intermediate Language, is the instrument
control programming language used in option 700 swept signal
generators. Option 700 swept signal generators are M.A.T.E.
(Modular Automatic Test Equipment) compatible.
Operating and Programming Reference H-l

HP 8360 B Series Specifications

General

Brand	HP
Model	8360 B Series
Category	Portable Generator
Language	English