HP 8360 B Series User Manual

Equipment Supplied
All HP 8360 B-Series swept signal generators are sent from the
factory with the following basic accessories:
w Rack handles (mounted)
n Power cord
n Software package
n A set of manuals
The following adapters are also shipped with the swept signal
generators:
Table 3-1.
Adapter Descriptions and Part Numbers Shipped with
Each Swept Signal Generator Model
HP 8362OB/HP 83622B/HP 83623B/HP 83624B/HP 83630B
Type-N (F) to 3.5 nun (F) 1250-1745
3.5 mm (F) to 3.5 nun (F)
5061.5311
HP 83640B/HP 83650B
2.4 mm (F) to K (F) 1250-2187
2.4 mm (F) to 2.4 mm (F) 1250-2188
Options Available
There are several options available on the HP 8360 B-Series swept
signal generators. For descriptive information on all of the options
available, refer to Chapter 25 “Specifications”. For installation
information on the rack mounting kits, refer to later paragraphs in
this chapter. For information on retrofitting options, refer to the
“Option Retrofits” chapter in the HP 8360 B-Series Swept Signal
Generator/HP 8360 L-Series Swept CW Generator Service Guide.
3-2 Installation

HP 8360 B Series Specifications

General

Brand	HP
Model	8360 B Series
Category	Portable Generator
Language	English