RSG when data is restored. Select the target server first and then from
the Original drop-down list, select the stores to be restored.
• Restore to a non-Exchange location and create RSG
Select this option to restore your data to a non-Exchange location. After
restore, Data Protector will create a Recovery Storage Group called DP
RSG on the target server. The stores that you have selected and logs will
be restored to this recovery group. Select the target server first and then
from the Original drop-down list, select the stores to be restored.
Optionally, specify the mount point for the storage group to be restored in
Mount backup volume to the path. Click Browse to specify the desired mount
point. By default, the storage group is mounted to the C:\Omni_Mnt
directory.
IMPORTANT:
The selected directory must be either empty or you can specify to create
a new directory. If the directory is not empty, the instant recovery
session fails.
Note that you can only specify the mount point for the storage group and
not for a specific store.
Zero downtime backup integration guide 403
To Next Page
Loading...
Need help?
General