HP HPE Synergy 12000 Frame User Manual

Create a logical enclosureCreate a logical enclosure
After HPE Synergy frames are discovered automatically during hardware setup, you must manually create a logical enclosure. The logical
enclosure must contain the number of HPE Synergy frames that are connected together with interconnect link cables. For example, if you
have three HPE Synergy frames cabled together, create a logical enclosure that contains all three HPE Synergy frames.
To create a logical interconnect group, go to OneView > SERVERS > Logical enclosure.
Create a logical enclosure 139

HP HPE Synergy 12000 Frame Specifications

General

Form Factor	Rack-mountable
Maximum Compute Modules	12
Management Module	HPE Synergy Composer
Cooling	Redundant fan modules
Power Supply	Redundant power supplies
Networking	HPE Synergy 12000 Frame Interconnect
Product Type	Blade Enclosure
Width	44.5 cm
Compliance	FCC, VCCI, BSMI, CCC, KCC, RoHS
Depth	36.25 in (92.08 cm)