HP HPE Synergy 12000 Frame User Manual

Pallet contentsPallet contents
ItemItem NameName DescriptionDescription
1 HPE Synergy 12000 Frame The frame for installing HPE Synergy components.
2 Front panel The front panel ports of the frame for KVM connection.
3 Appliance module blank A mandatory insert installed in any unused appliance module bay.
4 Appliance module A hardware appliance for embedded management.
5 Compute module blank A mandatory insert installed in any unused compute module bay.
6 Full-height module The full-height compute module.
7 Half-height module The half-height compute module.
8 Power supply blank A mandatory insert installed in any unused power supply bay.
9 Hot-plug power supply The power supply for the frame.
10 Fan A fan used to cool the components installed in the frame.
11 Frame link module The frame link module auto-discovers resources in the frame, has a
redundant option, and provides links for scaling of frames.
12 Interconnect blank A mandatory insert installed in any unused interconnect bay.
13 Interconnect module Any of several fabric or networking components, such as switches or
interconnect link modules, that enable networking communication.
1
1
1
1
1
2
Pallet contents 21

HP HPE Synergy 12000 Frame Specifications

General

Form Factor	Rack-mountable
Maximum Compute Modules	12
Management Module	HPE Synergy Composer
Cooling	Redundant fan modules
Power Supply	Redundant power supplies
Networking	HPE Synergy 12000 Frame Interconnect
Product Type	Blade Enclosure
Width	44.5 cm
Compliance	FCC, VCCI, BSMI, CCC, KCC, RoHS
Depth	36.25 in (92.08 cm)