Frame link module factory resetFrame link module factory reset
IMPORTANT:IMPORTANT:
When a frame is configured and is actively managed by HPE OneView, a factory reset should be performed only when
required by a recommended HPE OneView management or service process.
The Factory Reset action resets all frame link modules in a frame to factory default settings. Resetting a frame link module to factory
default settings will take the frame link module offline for up to 10 minutes. If the frame link module is installed in a frame managed by
HPE OneView, the frame link module will be reclaimed by HPE OneView after the factory reset is complete.
Some instances in which a factory reset might be necessary include:
Prior to moving a frame to a new HPE OneView environment.
After performing a factory reset of the HPE Synergy Composer that manages the frame.
For more information, see the HPE OneView for HPE Synergy documentation (https://www.hpe.com/info/synergy-docshttps://www.hpe.com/info/synergy-docs).
To Next Page
Loading...
