HP HPE Synergy 12000 Frame

Rack-free environment requirementsRack-free environment requirements
The HPE Synergy 12000 Frame (referred to as the frame) can be used in a rack-free environment. The following conditions must be met
when performing a rack-free installation:
A fully-populated frame can weigh up to 249.50 kg (550.00 lb). The object supporting the frame must be able to withstand this
weight.
Always place the frame on a sturdy, flat surface.
WARNING: WARNING: To reduce the risk of personal injury or damage to the equipment in a rack-free
environment:
Never stack the frame on top of another frame.
Never place equipment on top of the frame.
Never place the frame on a surface that cannot support up to 249.50 kg (550.00 lb).
Rack-free environment requirements 19