HP MSR SERIES

301
AH authentication hex key:
Outbound ESP setting:
ESP SPI: 8000 (0x00001f40)
ESP string-key: ******
ESP encryption hex key:
ESP authentication hex key:
-----------------------------
Sequence number: 2
Mode: isakmp
-----------------------------
Description: This is my complete policy
Security data flow: 3200
Selector mode: standard
Local address:
Remote address: 5.3.6.9
Transform set: completetransform
IKE profile:
SA duration(time based):
SA duration(traffic based):
# Display information about all IPv6 IPsec policies.
<Sysname> display ipsec ipv6-policy
-------------------------------------------
IPsec Policy: mypolicy
-------------------------------------------
-----------------------------
Sequence number: 1
Mode: manual
-----------------------------
Description: This is my first IPv6 policy
Security data flow: 3600
Remote address: 1000::2
Transform set: mytransform
Inbound AH setting:
AH SPI: 1235 (0x000004d3)
AH string-key: ******
AH authentication hex key:
Inbound ESP setting:
ESP SPI: 1236 (0x000004d4)
ESP string-key: ******
ESP encryption hex key:
ESP authentication hex key:
Outbound AH setting: