EasyManuals Logo
Home>HP>All in One Printer>PageWide Managed Color E77650

HP PageWide Managed Color E77650 User Manual

HP PageWide Managed Color E77650
264 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #125 background imageLoading...
Page #125 background image
Step two: Enable Scan to USB Drive
1. Select the Security tab.
2. Scroll to Hardware Ports and make sure that Enable Host USB plug and play is enabled.
3. Select the Scan/Digital Send tab.
4. Select the Enable Scan to USB Drive check box.
5. Click Apply at the bottom of the page.
NOTE: Most devices ship with Hard disk drives (HDDs) already installed. In some cases, additional storage
devices can be added via USB. Verify whether the Scan to USB Drive feature needs to be expanded to USB and
Hard drive
Step three: Congure the Quick Sets (optional)
NOTE: Quick Sets are short-cut jobs that can be accessed on the printer Home screen or within the Quick Sets
application.
1. In the Scan to USB Drive area of the left navigation pane, click Quick Sets.
2. Select one of the following options:
Select an existing Quick Set under Quick Sets Application in the table.
-OR-
Click Add to start the Quick Set Wizard.
3. If you selected Add, the Quick Sets Setup page opens. Complete the following information, and then click
Next.
Quick Set Name: Enter a title for the new Quick Set.
Quick Set Description: Enter a description of the Quick Set.
Quick Set Start Option: To set how the Quick Set starts, click either Enter application, then user
presses Start or Start instantly when selected from the Home Screen.
4. Select a default location where scanned les are saved on USB storage devices inserted into the USB port
on the control panel, and then click Next. The default location options are:
Save at root directory of the USB storage device
Create or place in this folder on the USB Storage Device — The path to the folder on the USB storage
device must be specied when using this le location option. A backslash \ must be used to separate
folder\subfolder names in the path.
5. Select an option from the Condition on Which to Notify: drop-down list, and then click Next.
This setting determines if, or how, users are notied when a Scan To USB Drive Quick Set job completes or
fails. The options for the Condition on Which to Notify: setting are:
ENWW Set up Scan to USB Drive 113

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP PageWide Managed Color E77650 and is the answer not in the manual?

HP PageWide Managed Color E77650 Specifications

General IconGeneral
BrandHP
ModelPageWide Managed Color E77650
CategoryAll in One Printer
LanguageEnglish

Related product manuals