HP PageWide Managed Color E77650 User Manual

Feature Description
Add numbering when job has
just one le (ex. _1–1)
1
Select this setting to add numbering to a le name when the job is only one le instead of multiple
les.
File Type Select the le format for the saved le.
Select the User editable check box to make this setting editable at the printer control panel.
High Compression (smaller
le)
1
Select this setting to compress the scanned le, which reduces the le size. However, the scanning
process for a High compression le might take longer than for a Normal compression le.
PDF encryption
1
If the le type is PDF, then this option encrypts the output PDF le. A password must be specied
as part of the encryption. The same password must be used to open the le. The user will be
prompted to enter a password prior to scanning their job if one has not been set prior to pressing
start.
Resolution Set the resolution for the le. Higher resolution images have more dots per inch (dpi), so they
show more detail. Lower resolution images have fewer dots per inch and show less detail, but the
le size is smaller.
Quality and File Size Select the quality for the le. Higher-quality images require a larger le size than lower-quality
images, and they take more time to send.
Color/Black Specify whether copies are to be printed in color, black and gray, or black only.
Suppress blank pages
1
If the Suppress blank pages option is enabled, blank pages will be ignored.
Create Multiple Files
1
Select this setting to scan pages into separate les based on a predetermined maximum number
of pages per le.
1
This setting is available only on the Advanced Settings page.
9. Review the selected options to verify that they are accurate, and then click Apply to complete the setup.
Step four: Congure the Quick Sets (optional)
Quick Sets are optional short-cut jobs that can be accessed on the main Home screen or within the Quick Sets
application at the printer.
1. In the Email Setup area of the left navigation pane, click Quick Sets.
2. Select one of the following options:
●
Select an existing Quick Set under Quick Sets Application in the table.
-OR-
●
Click Add to start the Quick Set Wizard.
3. If you selected Add, the Quick Sets Setup page opens. Complete the following information:
●
Quick Set Name: Enter a title for the new Quick Set.
●
Quick Set Description: Enter a description of the Quick Set.
●
Quick Set Start Option: To set how the Quick Set starts, click either Enter application, then user
presses Start or Start instantly when selected from the Home Screen.
4. Dene the following settings for the Quick Set: Address and Message Field Control, Signing and Encryption,
Notication, Scan Settings, File Settings.
5. Click Finish to save the Quick Set.
98 Chapter 6 Scan ENWW

HP PageWide Managed Color E77650 Specifications

General

Brand	HP
Model	PageWide Managed Color E77650
Category	All in One Printer
Language	English