Congure the operation mode
Use this procedure to congure how the printer sorts jobs into the output bins.
1. From the Home screen on the printer control panel, swipe until the Settings menu displays. Select the
Settings icon to open the menu.
2. Open the following menus:
●
Manage Stapler/Stacker
●
Operation Mode
3. Select a mode from the list of options. The following options are available:
●
Mailbox: The printer places jobs in dierent bins according to the person who sent them.
●
Stacker: The printer stacks jobs in the bins from bottom to top.
●
Function Separator: The printer places jobs in dierent bins according to printer function such as print
jobs, copy jobs, or fax jobs.
To congure the HP print driver for the selected operation mode, complete the following steps:
NOTE: Changing the operation mode causes the printer to restart.
Windows XP and Vista (Server 2008) HP PCL.6 drivers do not support output devices.
Windows
®
7
1. Make sure the printer is turned on and connected to the computer or a network.
2.
Open the Windows
®
Start menu, and then click Devices and Printers.
3. Right-click the name of the printer, and then select Printer Properties.
4. Click the Device Settings tab.
5. Select Update Now. Or, in the drop-down menu next to Automatic Conguration, select Update Now.
Windows
®
8.0, 8.1, and 10
1. Right-click on the bottom-left corner of the screen.
2. Select Control Panel. Under Hardware and Sound, select View devices and printers.
3. Right-click the name of the printer, and then select Printer Properties.
4. Click the Device Settings tab.
5. Select Update Now. Or, in the drop-down menu next to Automatic Conguration, select Update Now.
NOTE: Newer HP PCL-6 V4 drivers do not support Update Now. For these drivers, stop and restart the
print spooler. Click the Start button (or open a search box), in the search box type "services.msc", and then
press the Enter key. Right-click Print Spooler in the list of services, select Stop, and then right-click and
select Start.
42 Chapter 2 Paper trays ENWW