HP PageWide Managed Color E77650 User Manual

Change fax congurations
NOTE: The settings congured using the control panel override any settings made in the HP Embedded Web
Server.
●
Fax dialing settings
●
General fax send settings
●
Fax receive settings
Fax dialing settings
1. From the Home screen on the printer control panel, select Settings.
2. Open the following menus:
●
Fax
●
Fax Send Settings
●
Fax Dialing Settings
Congure any of the following settings, and then select Done:
Menu item Description
Redial on Error The Redial on Error feature sets the number of times a fax number will be redialed when an
error occurs during a fax transmission.
Redial on No Answer The Redial on No Answer setting selects the number of times the fax accessory redials if
the number dialed does not answer. The number of retries is either 0 to 1 (used in the U.S.)
or 0 to 2, depending on the location setting. The interval between retries is set by the redial
interval setting.
Redial on Busy The Redial on Busy setting selects the number of times (0 through 9) the fax accessory
redials a number when the number is busy. The interval between retries is set by the Redial
Interval setting.
Redial Interval The Redial Interval setting selects the number of minutes between retries if the number
dialed is busy or not answering, or if an error occurs.
NOTE: You might observe a redial message on the control panel when both the Redial on
Busy and Redial on No Answer settings are set to o. This occurs when the fax accessory
dials a number, establishes a connection, and then loses the connection. As a result of this
error condition, the fax accessory performs three automatic redial attempts regardless of
the redial settings. During this redial operation, a message displays on the control panel to
indicate that a redial is in progress.
Fax Send Speed The Fax Send Speed setting sets the modem bit rate (measured in bits per second) of the
Analog Fax modem while sending a fax.
●
Fast (v.34 – 33.6k)
●
Medium (v.17 – 14.4k)
●
Slow (v.29 – 9.6k)
Line Monitor Volume Use the Line Monitor Volume setting to control the printer's dialing volume level when
sending faxes.
Dialing Mode The Dialing Mode setting sets the type of dialing that is used: either tone (touch-tone
phones) or pulse (rotary-dial phones).
ENWW Change fax congurations 137

HP PageWide Managed Color E77650 Specifications

General

Print Technology	HP PageWide Technology
Functions	Print, Copy, Scan, Fax
Processor Speed	1.2 GHz
Scanner Type	Flatbed, ADF
Fax Memory	Up to 500 pages
Maximum Paper Size	A3
Operating System Compatibility	Windows, MacOS, Linux
Print Speed	Up to 50 ppm
Print Resolution	Up to 1200 x 1200 dpi
Print Languages	HP PCL 6, HP PCL 5c, HP Postscript Level 3 emulation, PDF
Display	8.0-in (20.3 cm) touchscreen CGD (color graphics display)
Mobile Printing Capability	HP ePrint, Apple AirPrint, Mopria-certified, Google Cloud Print
Wireless Capability	Yes
Connectivity	1 Hi-Speed USB 2.0 Device; 1 Ethernet 10/100/1000T network; 1 Hardware Integration Pocket
Hard Drive	320 GB
Duplex Printing	Automatic
Copy Speed	Up to 50 cpm
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 dpi
Scan File Formats	PDF, JPEG, TIFF, MTIFF, XPS, PDF/A
Fax Transmission Speed	33.6 kbps
Automatic Document Feeder	100 sheets
Energy Efficiency	ENERGY STAR qualified; EPEAT Silver
Maximum Copies	Up to 9, 999 copies