HP PageWide Managed Color E77650

Set up Scan to SharePoint
®
(Flow models only)
●
Introduction
●
Before you begin
●
Step one: Access the HP Embedded Web Server (EWS)
●
Step two: Enable Scan to SharePoint® and create a Scan to SharePoint Quick Set
●
Quick set scan settings and options for Scan to SharePoint®
Introduction
Use Scan to SharePoint
®
to scan documents directly to a Microsoft
®
SharePoint site. This feature eliminates the
need to scan the documents to a network folder, USB
ash drive, or email message, and then manually upload
the les to the SharePoint site.
Scan to SharePoint
®
supports all scanning options, including the ability to scan documents as images or use the
OCR features to create text les or searchable PDFs.
The feature is disabled by default. Enable Scan to SharePoint
®
in the HP Embedded Web Server (EWS).
NOTE: The Scan to SharePoint
®
feature is only available on workow-equipped printers.
Before you begin
Before this procedure can be completed, the destination folder that the scanned les will be saved to must exist
on the SharePoint site, and write access must be enabled to the destination folder. Scan to SharePoint
®
is
disabled by default.
Step one: Access the HP Embedded Web Server (EWS)
1.
From the Home screen on the printer control panel, touch the Information icon, and then touch the
Network icon to display the IP address or host name.
2. Open a web browser, and in the address line, type the IP address or host name exactly as it displays on the
printer control panel. Press the Enter key on the computer keyboard. The EWS opens.
NOTE: If the web browser displays a message indicating that accessing the website might not be safe,
select the option to continue to the website. Accessing this website will not harm the computer.
116 Chapter 6 Scan ENWW