Table 8-15 Copy settings — Copy Quick Sets (continued)
Option Description
Image Adjustment Use the settings to improve the overall quality of the copy. For example, adjust the Darkness and
Sharpness, and use the Background Cleanup setting to remove faint images from the background or to
remove a light background color.
●
Darkness: Adjust to increase or decrease the amount of white and black in the colors
●
Contrast: Adjust to increase or decrease the dierence between the lightest and darkest color on
the page
●
Background Cleanup: Adjust if you are having trouble copying a faint image
●
Sharpness: Adjust to sharpen or soften the image. For example, increasing the sharpness could
make text look clearer, but decreasing it could make photographs look smoother.
Optimize Text/Picture Optimize the job for the type of image being scanned: text, graphics, or photos.
Select from the following options:
●
Text: Use for documents that contain mostly text
●
Mixed: Use for documents with a mix of text and pictures
●
Printed picture: Use for line drawings and preprinted images, such as magazine clippings or pages
from books
NOTE: If bands of irregular intensity print on the copies, try selecting Printed picture to improve
the quality.
●
Photograph: Use for photographic prints
Edge-to-Edge Use to avoid shadows that can display along the edges of copies when the original document is printed
close to the edges.
Combine this feature with the Reduce/Enlarge feature to ensure that the entire page is printed on the
copies.
When the Edge-to-Edge feature is turned on, the printer minimizes margins and prints as close to the
edge of the paper as possible.
Erase Edges Select this setting to specify the width of edge margins to be erased, in either inches or millimeters, for
the front side and back side of a job.
Collate For printers that support print-job nishing, each set of copied pages are assembled in the same order
as the original document.
NOTE: If the printer has a stapler installed, select a staple option. To not staple the copies, select
None.
Select a Collate option:
●
Collate on: If making more than one copy, select to assemble pages in the correct order for each
set of copies.
●
Collate o: Select to group the same pages together. For example, if making ve copies of an
original document that has two pages, all ve rst pages are grouped together and all ve second
pages are grouped together.
Image Preview Select whether to require or make optional a displayed preview of the job or to disable a preview.
Example Quick Sets
Below is an example of what the Quick Sets area looks like after quick sets have been created.
ENWW Create a Quick Set 161