3. Load paper into the tray. Check the paper to verify
that the guides touch the stack, but do not bend it.
For information about how to orient the paper, see
Table 2-2 Tray 2 and the 550-sheet trays paper
orientation on page 27.
NOTE: To prevent jams, do not overll the tray.
Be sure that the top of the stack is below the tray
full indicator.
NOTE: If the tray is not adjusted correctly, an
error message might appear during printing or the
paper might jam.
4. Close the tray.
5. The tray conguration message displays on the
printer control panel.
6. Select the OK button to accept the detected type
and size, or select the Modify button to choose a
dierent paper size or type.
For custom-size paper, specify the X and Y
dimensions for the paper when the prompt
displays on the printer control panel.
26 Chapter 2 Paper trays ENWW