â– show config -- Show the switch startup configuration (p. 540)
â– filename < config | config1 > -- Display specified configuration. (p. 551)
â– files -- List saved configuration files. (p. 551)
â– status -- Check if the running configuration differs from the statup configuration. (p. 596)
â– show connection-rate-filter -- List the ports and the on/off connection-rate-filter status and sensitivity
(p. 543)
â– all-hosts -- Show blocked and throttled IP addresses. (p. 529)
â– blocked-hosts -- Show blocked IP addresses. (p. 534)
â– throttled-hosts -- Show throttled IP addresses. (p. 599)
â– show console -- Show serial link/console settings (p. 543)
â– show cpu -- Show average CPU utilization over the last 1, 5, and 60 seconds; or the number of
seconds specified (p. 543)
â– slot -- Display module CPU statistics. (SLOT-ID-RANGE) (p. 591)
â– slave_time < 1 to 90 > -- Time (seconds) over which to average CPU utilization. (NUMBER)
(p. 591)
â– time < 1 to 300 > -- Time (seconds) over which to average CPU utilization. (NUMBER) (p. 599)
â– show crypto -- Display flash files used for authentication (p. 544)
â– autorun-cert -- Display trusted certificate. (p. 533)
â– autorun-key -- Display autorun key. (p. 533)
â– client-public-key -- Display ssh authorized client public keys. (p. 537)
â– babble -- Display phonetic hash. (p. 533)
â– fingerprint -- Display hexadecimal hash. (p. 552)
â– keyfile < manager | operator > -- Choose to display manager or operator keys. (p. 564)
â– babble -- Display phonetic hash. (p. 533)
â– fingerprint -- Display hexadecimal hash. (p. 552)
â– keylist -- Select keys to display (comma-delimited list). (ASCII-STR) (p. 564)
â– babble -- Display phonetic hash. (p. 533)
â– fingerprint -- Display hexadecimal hash. (p. 552)
â– host-cert -- Display https certificate information. (p. 555)
â– host-public-key -- Display ssh host RSA public key. (p. 555)
â– babble -- Display phonetic hash. (p. 533)
â– fingerprint -- Display hexadecimal hash. (p. 552)
â– show debug -- Display currently active debug log destinations and types (p. 545)
â– buffer -- Show the contents of the debug log buffer (p. 535)
â– -c -- Stop after displaying <count> messages. (NUMBER) (p. 536)
â– option -- Filter messages shown to those matching a string up to 64 chars. (ASCII-STR) (p.
574)
â– -r -- Display messages in reverse order (most recent first). (p. 583)
â– show dhcp-relay -- Shows the current status of DHCP Relay Agent, option 82 statistics and BOOTP
Gateway for configured interfaces (p. 548)
â– bootp-gateway -- Show the configured BOOTP gateway for configured interfaces (p. 534)
â– vlan -- Show the configured BOOTP Gateway for VLAN. (p. 603)
â– vlan -- (VLAN-ID) (p. 603)
â– show dhcp-snooping -- Display DHCP snooping information (p. 548)
â– binding -- Display DHCP snooping binding information. (p. 534)
â– stats -- Display DHCP snooping events. (p. 596)
â– show fastboot -- Shows the current status of fastboot on switch (p. 551)
â– show fault-finder -- Show the fault-finder table (p. 551)
â– show feature-coordinator -- Display the feature coordination restrictions (p. 551)
â– show filter -- Show a table of security filters or a filter detailed information, if the filter's INDEX is
specified (p. 552)
â– INDEX -- Show detailed information for the filter identified by the INDEX. The indices are
displayed by the 'show filter' command. (p. 557)
512© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide