■ port-list -- Show remote or local device information for the specified ports. ([ethernet]
PORT-LIST) (p. 578)
■ remote-device -- Show LLDP remote device information. (p. 585)
■ port-list -- Show remote or local device information for the specified ports. ([ethernet]
PORT-LIST) (p. 578)
■ stats -- Show LLDP statistics (p. 596)
■ port-list -- Specify the port or list of ports. ([ethernet] PORT-LIST) (p. 578)
■ show lockout-mac -- Show the MAC addresses that have been locked out of the network (p. 566)
■ show logging -- Display log events (p. 567)
■ -a -- Display all log events, including those from previous boot cycles. (p. 527)
■ event_class < -M | -P | -W | ... > -- Specify substring to match in log entry. See 'log help' for
details. (p. 550)
■ option -- Filter events shown. See 'show logging help' for details. (ASCII-STR) (p. 574)
■ -r -- Display log events in reverse order (most recent first). (p. 583)
■ show loop-protect -- Show loop protection status (p. 567)
■ port-list -- Show loop protection summary for ports. ([ethernet] PORT-LIST) (p. 578)
■ show mac-address -- Show MAC addresses the switch has learned (p. 568)
■ address-table-port -- Show MAC addresses learned on the specified ports. ([ethernet] PORT-LIST)
(p. 528)
■ MAC -- Show port the specified MAC address is located on. (MAC-ADDR) (p. 567)
■ vlan -- Show MAC addresses learned on the specified VLAN. (VLAN-ID) (p. 603)
■ show management -- Show the switch's addresses available for management and the time server
if the switch uses one (p. 569)
■ show mesh -- Show the switch mesh information such as mesh ports, adjacent switches and their
peer ports (p. 569)
■ show modules -- (p. 570)
■ details -- (p. 547)
■ show monitor -- Show the switch network monitoring status and configuration, if network
monitoring is enabled (p. 570)
■ endpoint -- Remote mirroring destination configuration. (p. 550)
■ mirror_session_id < 1 to 4 > -- Mirror destination number. (p. 569)
■ name -- Mirror destination name. (p. 572)
■ show name -- Show names assigned to the ports (p. 572)
■ port-list -- Show names assigned to the ports ([ethernet] PORT-LIST) (p. 578)
■ show policy -- Show policy config. (p. 576)
■ name -- Enter policy name. (ASCII-STR) (p. 572)
■ resources -- Show the policy resources (p. 585)
■ show port-access -- Show 802 (p. 577)
■ -- Show Web/MAC Authentication statistics and configuration ([ethernet] PORT-LIST) (p. 525)
■ authenticator -- Show 802 (p. 531)
■ clients -- Show the current 802.1X client session statistics. (p. 538)
■ detailed -- Show the current 802.1X client session detailed statistics. (p. 546)
■ config -- Show 802.1X authenticator configuration. (p. 540)
■ session-counters -- Show 802.1X current (or last if no current sessions open) sessions
counters. (p. 590)
■ statistics -- Show authentication sessions statistics for 802.1X authenticator. (p. 594)
■ vlan -- Show authorized and unauthorized vlans for 802.1X authenticator. (p. 603)
■ mac-based -- Show MAC Authentication statistics and configuration (p. 568)
■ clients -- Show the connected MAC address information. (p. 538)
■ detailed -- Show the connected MAC address detailed information. (p. 546)
■ config -- Show the current configuration of MAC Authentication. (p. 540)
■ auth-server -- Show the authentication server-related configuration items. (p. 532)
■ detailed -- Show the detailed configuration of MAC Authentication. (p. 546)
517© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide
To Next Page
Loading...
