ip-addr -- Destination IP address to display the routes to. (IP-ADDR) (p. 561)■
■ type < static | connected | rip | ... > -- Specify type of routes to display. (p. 600)
■ source-binding -- Show Dynamic IP Lockdown trap status. (p. 592)
■ traps -- Show Dynamic IP Lockdown trap status. (p. 599)
■ source-lockdown -- Show Dynamic IP Lockdown configuration. (p. 592)
■ bindings -- Show source bindings for Dynamic IP Lockdown ports. (p. 534)
■ portlist -- Specify the ports for which source bindings need to be displayed. ([ethernet]
PORT-NUM) (p. 578)
■ status -- Show Dynamic IP Lockdown port status. (p. 596)
■ ssh -- Show both current SSH configuration and the status of active connections (p. 593)
■ show ip-recv-mac-address -- Show VLAN L3-Mac-Address table. (p. 562)
■ show ipv6 -- Show the device IPv6 configuration (p. 562)
■ authorized-managers -- Show IPV6 addresses allowed to manage the switch (p. 532)
■ mld -- Invoked without any parameters, shows per-VLAN MLD status, or, if VLANs are disabled
displays the global MLD status (p. 570)
■ config -- Show MLD configuration information. (p. 540)
■ statistics -- Show MLD statistics. (p. 594)
■ vlan -- Show MLD VLAN information. (p. 603)
■ vlan-id -- Show MLD operational information for the VLAN specified. (VLAN-ID) (p. 606)
■ config -- Show MLD configuration information for the VLAN specified. (p. 540)
■ counters -- Show MLD VLAN counter information. (p. 543)
■ group -- Show MLD VLAN group info. (p. 553)
■ ipv6-addr -- Show MLD VLAN group address information. (IPV6-ADDR) (p. 563)
■ statistics -- Show MLD VLAN statistics (p. 594)
■ nd -- Show the IPv6 Neighbor Discovery settings (p. 573)
■ neighbors -- Displays information on the IPv6 neighbor discovery cache (p. 573)
■ vlan -- Displays information on the IPv6 neighbor discovery cache (p. 603)
■ vlan -- Show IPv6 information for the VLAN with the ID supplied. (VLAN-ID) (p. 603)
■ route -- Show the IPv6 routing table (p. 587)
■ ipv6-addr -- Destination IPv6 address to display the routes to. (IPV6-ADDR) (p. 563)
■ type < connected > -- Specify type of routes to display. (p. 600)
■ routers -- Show the IPv6 Router table entries (p. 587)
■ vlan -- Show the IPv6 Router Table Entries for VLAN. (p. 603)
■ vlan -- Show IPv6 information for the VLAN with the ID supplied. (VLAN-ID) (p. 603)
■ vlan -- Show IPv6 status information for all VLANs (p. 603)
■ vlan -- Show IPv6 information for the VLAN with the ID supplied. (VLAN-ID) (p. 603)
■ show jumbos -- Show the untagged Max frame size for the switch (p. 564)
■ show key-chain -- Display key chains (p. 564)
■ CHAIN-NAME -- Show the chain detailed information. (ASCII-STR) (p. 537)
■ show lacp -- Show status of LACP trunks (p. 565)
■ distributed -- Show distributed lacp of local and remote switch (p. 549)
■ show licenses -- Display license status for premium features (p. 565)
■ uninstalled -- Display verification key for features which have been uninstalled. (p. 601)
■ show link-keepalive -- show link-keepalive information on the switch (p. 565)
■ statistics -- show detailed statistics for all link-keepalive enabled ports. (p. 594)
■ show lldp -- Show various LLDP settings (p. 566)
■ auto-provision -- Show LLDP auto-provision related info for radio-ports (p. 532)
■ radio-ports -- Show LLDP radio-ports information. (p. 583)
■ config -- Show LLDP configuration information (p. 540)
■ port-list -- Specify the port or list of ports. ([ethernet] PORT-LIST) (p. 578)
■ info -- Show LLDP information about the remote or local device (p. 557)
■ local-device -- Show LLDP local device information. (p. 566)
516© 2009 Hewlett-Packard Development Company, L.P.
showCommand Line Interface Reference Guide
To Next Page
Loading...
