HPE FlexNetwork 5510 HI Series Layer 3 - Ip Routing Configuration Guide

135
Step Command Remarks
3. (Optional.) Specify an
IS-IS cost style.
cost-style
{
narrow
|
wide
|
wide-compatible
| {
compatible
|
narrow-compatible
} [
relax-spf-limit
] }
By default, the IS-IS cost
type is
narrow
.
4. Return to system view.
quit
N/A
5. Enter interface view.
interface
interface-type interface-number
N/A
6. (Optional.) Specify a cost
for the IS-IS interface.
isis cost
value [
level-1
|
level-2
]
By default, no cost for the
interface is specified.
Configuring a global IS-IS cost
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter IS-IS view.
isis
[ process-id ] [
vpn-instance
vpn-instance-name ]
N/A
3. (Optional.) Specify
an IS-IS cost style.
cost-style
{
narrow
|
wide
|
wide-compatible
|
{
compatible
|
narrow-compatible
}
[
relax-spf-limit
] }
By default, the IS-IS cost
style is
narrow
.
4. Specify a global
IS-IS cost.
circuit-cost
value [
level-1
|
level-2
]
By default, no global cost is
specified.
Enabling automatic IS-IS cost calculation
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter IS-IS view.
isis
[ process-id ] [
vpn-instance
vpn-instance-name ]
N/A
3. Specify an IS-IS cost
style.
cost-style
{
wide
|
wide-compatible
}
By default, the IS-IS cost is
narrow
.
4. Enable automatic IS-IS
cost calculation.
auto-cost enable
By default, automatic IS-IS cost
calculation is disabled.
5. (Optional.) Configure a
bandwidth reference
value for automatic IS-IS
cost calculation.
bandwidth-reference
value The default setting is 100 Mbps.
Specifying a preference for IS-IS
If multiple routing protocols find routes to the same destination, the route found by the routing
protocol that has the highest preference is selected as the optimal route.
Perform this task to assign a preference to IS-IS directly or by using a routing policy. For more
information about the routing policy, see "Configuring routing policies."
To configure a preference for IS-IS:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter IS-IS view.
isis
[ process-id ] [
vpn-instance
vpn-instance-name ]
N/A

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English