EasyManuals Logo

HPE FlexNetwork 5510 HI Series Layer 3 - Ip Routing Configuration Guide

HPE FlexNetwork 5510 HI Series
486 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #163 background imageLoading...
Page #163 background image
152
Configuring IS-IS FRR using a routing policy
You can use the apply fast-reroute backup-interface command to specify a backup next hop in a
routing policy for routes matching specific criteria. You can also perform this task to reference the
routing policy for IS-IS FRR. For more information about the apply fast-reroute backup-interface
command and routing policy configurations, see "Configuring routing policies."
T
o configure IS-IS FRR using a routing policy:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Configure the source
address of echo packets.
bfd echo-source-ip
ip-address
By default, the source address of
echo packets is not configured.
3. Enter IS-IS view.
isis
[ process-id ] [
vpn-instance
vpn-instance-name ]
N/A
4. Enable IS-IS FRR using a
routing policy.
fast-reroute
route-policy
route-policy-name
By default, this feature is not
enabled.
Configuring BFD for IS-IS FRR
By default, IS-IS FRR does not use BFD to detect primary link failures. To speed up IS-IS
convergence, enable BFD single-hop echo detection for IS-IS FRR to detect primary link failures.
To configure BFD for IS-IS FRR:
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Configure the source IP
address of BFD echo
packets.
bfd echo-source-ip
ip-address
By default, the source IP address
of BFD echo packets is not
configured.
For more information, see High
Availability Command Reference.
3. Enter interface view.
interface
interface-type
interface-number
N/A
4. Enable BFD for IS-IS FRR.
isis primary-path-detect bfd
echo
By default, BFD for IS-IS FRR is
disabled.
Displaying and maintaining IS-IS
Execute display commands in any view and the reset command in user view.
Task Command
Display brief IS-IS backup configuration
information.
display isis brief
[ process-id ] [
standby slot
slot-number ]
Display IS-IS GR log information.
display isis graceful-restart event-log slot
slot-number
Display the IS-IS GR status.
display isis graceful-restart status
[
level-1
|
level-2
]
[ process-id ]
Display IS-IS backup interface
information.
display isis interface
[ interface-type interface-number ]
[
verbose
] [ process-id ]
[
standby
slot
slot-number ]

Table of Contents

Other manuals for HPE FlexNetwork 5510 HI Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HPE FlexNetwork 5510 HI Series and is the answer not in the manual?

HPE FlexNetwork 5510 HI Series Specifications

General IconGeneral
BrandHPE
ModelFlexNetwork 5510 HI Series
CategorySwitch
LanguageEnglish

Related product manuals