254
Step Command Remarks
13. Configure BGP updates sent
to the 6PE peer or peer
group to carry only the public
AS number.
peer
{ group-name | ip-address
[ mask-length ] }
public-as-only
By default, this feature is not
configured.
14. Specify the maximum
number of routes that BGP
can receive from the 6PE
peer or peer group.
peer
{ group-name | ip-address
[ mask-length ] }
route-limit
prefix-number [ {
alert-only
discard
|
reconnect
reconnect-time } |
percentage-value ] *
By default, the number of
routes that a router can receive
from the 6PE peer or peer
group is not limited.
15. Specify a preferred value for
routes received from the 6PE
peer or peer group.
peer
{ group-name | ip-address
[ mask-length ] }
preferred-value
value
By default, the preferred value
is 0.
16. Configure the device as a
route reflector and the 6PE
peer or peer group as a
client.
peer
{ group-name | ip-address
[ mask-length ] }
reflect-client
By default, no route reflector or
client is configured.
17. Return to user view.
return
N/A
18. Display information about the
6PE peer or peer group.
display bgp peer ipv6
[
unicast
]
[
group-name
group-name
log-info
|
ip-address {
log-info
|
verbose
} |
verbose
]
Available in any view.
19. Display routing information
advertised to or received
from the 6PE peer or peer
group.
display bgp routing-table ipv6
[
unicast
]
peer
ip-address
{
advertised-routes
|
received-routes
} [ network-address
prefix-length |
statistics
]
Available in any view.
20. Perform soft reset on the
inbound or outbound BGP
6PE connection.
refresh bgp
ip-address {
export
|
import
}
ipv6
[
unicast
]
Available in user view.
21. Reset a BGP 6PE
connection.
reset bgp
ip-address
ipv6
[
unicast
]
Available in user view.
Displaying and maintaining BGP
Execute display commands in any view and reset commands in user view (IPv4).
Task Command
Display BGP NSR status information.
display bgp non-stop-routing status
Display BGP IPv4 unicast peer group
information.
display bgp group ipv4
[
unicast
] [
vpn-instance
vpn-instance-name ]
[
group-name
group-name ]
Display BGP IPv4 unicast peer or peer
group information.
display bgp peer ipv4
[
unicast
] [
vpn-instance
vpn-instance-name ] [ ip-address {
log-info
|
verbose
} |
group-name
group-name
log-info
|
verbose
]
Display BGP IPv4 unicast routing
information.
display bgp routing-table ipv4
[
unicast
] [
vpn-instance
vpn-instance-name ] [ network-address [ { mask | mask-length }
[
longest-match
] ] ]
Display BGP IPv4 unicast route
advertisement information.
display bgp routing-table ipv4
[
unicast
] [
vpn-instance
vpn-instance-name ] network-address [ mask | mask-length ]
advertise-info
To Next Page
Loading...
Need help?
General