HPE FlexNetwork 5510 HI Series Layer 3 - Ip Routing Configuration Guide

201
Step Command Remarks
5. (Optional.) Configure a
description for the peer
group.
peer
group-name
description
description-text
By default, no description is
configured for the peer group.
6. Create the BGP IPv4 unicast
address family or BGP-VPN
IPv4 unicast address family
and enter its view.
address-family ipv4
[
unicast
]
By default, the BGP IPv4 unicast
address family or BGP-VPN IPv4
unicast address family is not
created.
7. Enable the router to
exchange IPv4 unicast
routing information with
peers in the specified peer
group.
peer
group-name
enable
By default, the router cannot
exchange IPv4 unicast routing
information with the peers.
To configure an EBGP peer group by using Method 3 (IPv6):
Step Command Remarks
1. Enter system view.
system-view
N/A
2. Enter BGP view or BGP-VPN
instance view.
• Enter BGP view:
bgp as-number
• Enter BGP-VPN instance
view:
a. bgp as-number
b. ip vpn-instance
vpn-instance-name
N/A
3. Create an EBGP peer group.
group
group-name
external
By default, no EBGP peer group is
created.
4. Add a peer into the EBGP
peer group.
peer
ipv6-address [ prefix-length ]
group
group-name
as-number
as-number
By default, no peer exists in the
peer group.
BGP can use an IPv6 link-local
address to establish a peer
relationship with a peer when the
following conditions exist:
• The IPv6 link-local address
belongs to the interface
directly connected to the
local router.
• The peer connect-interface
command is configured on
the peer to specify the
interface as the source
interface.
5. (Optional.) Configure a
description for the peer
group.
peer
group-name
description
description-text
By default, no description is
configured for the peer group.
6. Create the BGP IPv6 unicast
address family or BGP-VPN
IPv6 unicast address family
and enter its view.
address-family ipv6
[
unicast
]
By default, the BGP IPv6 unicast
address family or BGP-VPN IPv6
unicast address family is not
created.
7. Enable the router to
exchange IPv6 unicast
routing information with
peers in the specified peer
group.
peer
group-name
enable
By default, the router cannot
exchange IPv6 unicast routing
information with the peers.

HPE FlexNetwork 5510 HI Series Specifications

General

Brand	HPE
Model	FlexNetwork 5510 HI Series
Category	Switch
Language	English