HPE FlexNetwork 5510 HI Series Layer 3 - Ip Routing Configuration Guide

256
Task Command
Display BGP IPv6 unicast peer or peer
group information.
display bgp peer ipv6
[
unicast
] [
group-name
group-name
log-info
| ip-address {
log-info
|
verbose
} | ipv6-address
{
log-info
|
verbose
} |
verbose
]
display bgp peer ipv6
[
unicast
]
vpn-instance
vpn-instance-name [
group-name
group-name
log-info
|
ipv6-address {
log-info
|
verbose
} |
verbose
]
Display BGP IPv6 unicast routing
information.
display bgp routing-table ipv6
[
unicast
] [
vpn-instance
vpn-instance-name ] [ network-address prefix-length
[
advertise-info
] ]
Display BGP IPv6 unicast routing
information sent to/received from the
specified BGP peer.
display bgp routing-table ipv6
[
unicast
]
peer
{ ip-address |
ipv6-address } {
advertised-routes
|
received-routes
}
[ network-address prefix-length |
statistics
]
display bgp routing-table ipv6
[
unicast
]
vpn-instance
vpn-instance-name
peer
ipv6-address {
advertised-routes
|
received-routes
} [ network-address prefix-length |
statistics
]
Display BGP IPv6 unicast routing
statistics.
display bgp routing-table ipv6
[
unicast
] [
vpn-instance
vpn-instance-name ]
statistics
Display BGP IPv6 unicast routing
information matching the specified AS
path list.
display bgp routing-table ipv6
[
unicast
] [
vpn-instance
vpn-instance-name ]
as-path-acl
as-path-acl-number
Display BGP IPv6 unicast routing
information matching the specified BGP
community list.
display bgp routing-table ipv6
[
unicast
] [
vpn-instance
vpn-instance-name ]
community-list
{ { basic-community-list-number | comm-list-name }
[
whole-match
] | adv-community-list-number }
Display dampened BGP IPv6 unicast
routing information.
display bgp routing-table dampened ipv6
[
unicast
]
[
vpn-instance
vpn-instance-name ]
Display BGP dampening parameter
information.
display bgp dampening parameter ipv6
[
unicast
]
[
vpn-instance
vpn-instance-name ]
Display BGP IPv6 unicast routing flap
statistics.
display bgp routing-table flap-info ipv6
[
unicast
]
[
vpn-instance
vpn-instance-name ] [ network-address
prefix-length |
as-path-acl
as-path-acl-number ]
Display the incoming label of BGP IPv6
unicast routing information.
display bgp routing-table ipv6
[
unicast
]
inlabel
Display the outgoing label of BGP IPv6
unicast routing information.
display bgp routing-table ipv6
[
unicast
]
outlabel
Display information about routes
advertised by the
network
command and
shortcut routes configured by the
network short-cut
command.
display bgp network ipv6
[
unicast
] [
vpn-instance
vpn-instance-name ]
Display BGP path attribute information.
display bgp paths
[ as-regular-expression ]
Display BGP IPv6 unicast address family
update group information.
display bgp update-group ipv6
[
unicast
] [ ip-address |
ipv6-address ]
display bgp update-group ipv6
[
unicast
]
vpn-instance
vpn-instance-name [ ipv6-address ]
Reset IPv6 unicast BGP sessions.
reset bgp
{ as-number | ipv6-address |
all
|
external
|
group
group-name |
internal
}
ipv6
[
unicast
] [
vpn-instance
vpn-instance-name ]
reset bgp
ip-address
ipv6
[
unicast
]

HPE FlexNetwork 5510 HI Series Specifications

General

Model	HPE FlexNetwork 5510 HI Series
Category	Switch
Switch Type	Managed
Fans	Redundant fans
Layer	Layer 3
IPv6 Support	Yes
Warranty	Limited lifetime warranty
Power over Ethernet (PoE)	Available on some models (PoE+)
MAC Address Table Size	32, 000 entries
Routing Protocol	RIP, OSPF, BGP, IS-IS, Static Routing
Management	CLI, Web, SNMP
Operating Temperature	0°C to 45°C
Dimensions	440 x 400 x 44 mm
Input Voltage	100-240 VAC, 50/60 Hz
Memory and Processor	1 GB RAM, 1 GHz CPU
Operating Humidity	5% to 95% (non-condensing)
Security Features	ACL, 802.1X, RADIUS, TACACS+, SSH, SSL