Hypertherm Powermax 125 Service Manual

296 Powermax125 Service Manual 808070
11 – Parts
023279 External machine interface cable (start, stop, arc transfer signals), 15 m (50 feet),
spade connectors
228350 Kit: External Machine interface cable (start, stop, arc transfer signals) for divided arc
voltage, 7.6 m (25 feet), spade connectors
228351 Kit: External machine interface cable (start, stop, arc transfer signals) for divided arc
voltage, 15 m (50 feet), spade connectors
223354 External machine interface cable (start, stop, arc transfer signals) for divided arc
voltage, 3.0 m (10 feet), D-sub connector with screws
223355 External machine interface cable (start, stop, arc transfer signals) for divided arc
voltage, 6.1 m (20 feet), D-sub connector with screws
223048 External machine interface cable (start, stop, arc transfer signals) for divided arc
voltage, 7.6 m (25 feet), D-sub connector with screws
223356 External machine interface cable (start, stop, arc transfer signals) for divided arc
voltage, 10.7 m (35 feet), D-sub connector with screws
123896 External machine interface cable (start, stop, arc transfer signals) for divided arc
voltage, 15 m (50 feet), D-sub connector with screws
5 228711 Kit: Powermax65/85/105/125 machine interface for raw arc voltage (strain relief)
6 128650 Remote start pendant for machine torch, 7.6 m (25 feet)
6 128651 Remote start pendant for machine torch, 15 m (50 feet)
6 128652 Remote start pendant for machine torch, 23 m (75 feet)
Part Number Description

Hypertherm Powermax 125 Specifications

General

Output Current	30-125 A
Input Power	15.2 kW
Open Circuit Voltage	300 VDC
Gas Supply	Clean, dry, oil-free air or nitrogen
Input Power Cable Length	10 ft (3 m)
Rated Output Current	125 A
Gas Type	Air or nitrogen
Cutting Capacity	1-1/4 inch (32 mm)
Pierce Capacity	1 inch (25 mm)
Input Voltage	200-600 V, 3-PH
Duty Cycle	100% @ 125 A
Certifications	CSA
Maximum Clean Cut Thickness	1-1/4 inch (32 mm)
Cooling Method	Fan-cooled
Torch Options	Hand