Hypertherm Powermax 125 Service Manual

314 Powermax125 Service Manual 808070
11 – Parts
428161 Kit: Duramax Hyamp hand torch lead replacement, 23 m (75 foot)
428144 Kit: Duramax Hyamp 180° full-length machine torch positioning sleeve
428146 Kit: Duramax Hyamp 180° mini machine torch adapter ring
428145 Kit: Duramax Hyamp 180° machine torch mounting sleeve
428248 Kit: Duramax Hyamp 180° machine torch coupler
228720 Kit: Duramax/Hyamp/MRT 180° machine torch cap-sensor switch replacement
428149 Kit: Duramax Hyamp 180° machine torch lead replacement, 4.6 m (15 feet)
428150 Kit: Duramax Hyamp 180° machine torch lead replacement, 7.6 m (25 feet)
428151 Kit: Duramax Hyamp 180° machine torch lead replacement, 10.7 m (35 feet)
428152 Kit: Duramax Hyamp 180° machine torch lead replacement, 15 m (50 feet)
428153 Kit: Duramax Hyamp 180° machine torch lead replacement, 23 m (75 feet)
Part Number Description

Hypertherm Powermax 125 Specifications

General

Output Current	30-125 A
Input Power	15.2 kW
Open Circuit Voltage	300 VDC
Gas Supply	Clean, dry, oil-free air or nitrogen
Input Power Cable Length	10 ft (3 m)
Rated Output Current	125 A
Gas Type	Air or nitrogen
Cutting Capacity	1-1/4 inch (32 mm)
Pierce Capacity	1 inch (25 mm)
Input Voltage	200-600 V, 3-PH
Duty Cycle	100% @ 125 A
Certifications	CSA
Maximum Clean Cut Thickness	1-1/4 inch (32 mm)
Cooling Method	Fan-cooled
Torch Options	Hand