Display Messages
140
B19 ERROR:
DC RETURNED*
This message indicates an
incorrectly assembled and tested
machine.
Cycle power. If the message appears again contact the printer
manufacturer and report this message.
B20: STATUS 00%
DOWNLOAD MODE
Status message informing the
operator that software is being
downloaded. Percentage figure
indicates approximate amount
loaded into the printer.
No action required.
B21: STATUS
PRINTER RESET
Status message informing the
operator that the printer is
undergoing a system reset.
No action required.
Table 3. Message List
Operator Panel Message Explanation Corrective Action
To Next Page
Loading...
Need help?
General
