Selecting And Running Tests
225
9. ENTER HEX PRINT MODE
ENABLE*
Asterisk (*) indicates this choice is now active.
10. STOP NOT READY Returns printer to NOT READY mode.
11. RETURN + ENTER OPERATOR MENU
UNLOCKED
Relocks the ENTER key.
12. START READY Puts printer in READY mode.
13. Send a file from the host computer. The printer outputs a hex dump. Refer to the ASCII chart on page 447.
14. When the hex dump is complete, take the printer offline and change the Hex Dump Mode back to Disable.
Follow the steps outlined above and select Disable.
Step Press Displayed Result Notes
To Next Page
Loading...
Need help?
General
