IBM Professional Series User Manual

Rules and Restrictions: The exit will be made available to the
user if they follow these rules and restrictions when setting
up
an HST ACC routine.
1. Naming conventions are:
Main exit name of the routine is
"HSTACC
TEXT."
Termination exit entry point name is "HSTACCFE."
2. Install the user's exit by linking HST ACC together with
other VMPCSERV text decks. No attempt is made to
find the HSTACC deck on any TXTLIB or LOADLIB
format libraries. Dynamic loading can not be performed.
Link
HSTACC together with VMPCSERV service
module by either:
Making
HSTACC available on a disk when
VMPCSERV is installed by the local VM/PC
machine.
-OR-
Using the EXEC provided (GENPCSER) to load,
and generate the module in the host machine first by:
• Saving the uploaded TEXT decks that make up
VMPCSERV.
Making the uploaded TEXT decks available
when the GENPCSER EXEC is run that
produces VMPCSERV module.
• HSTACC must be in text deck form, and
available (ACCESSed) at GENPCSER EXEC
time.
Note: GENPCSER EXEC will be uploaded to
the remote system during install of VMPCSERV
from the CMS 101 disk.
3. User exit must
return on Register 14.
Chapter 6. Remote Services
6-21

IBM Professional Series Specifications

General

Brand	IBM
Model	Professional Series
Category	Software
Language	English