IBM Professional Series User Manual

chosen should not be common to the normal data
stream being entered. When you log on,
LINEDEL
ON is in effect.
L I NEND 1 ON I
OFF
char
defines the logical line end symbol. If ON is
specified, the default symbol (#) becomes the logical
line end symbol.
If OFF is specified, no logical line
end editing is done. If char is specified, that
character becomes the logical line end symbol; the
character chosen should not be common to the
normal data stream being entered. When you log on,
LIN END
ON is in effect.
ESCAPE 1 ON f
OFF
char
defines the logical escape symbol. If ON is
specified, the default symbol (") becomes the logical
escape symbol.
If OFF is specified, no logical escape
editing
is done. If char is specified, that character
becomes the logical escape symbol; the character
chosen should not be common to the normal data
stream being entered. When you log on, ESCAPE
ON is in effect.
HILIGHT JON t
I OFF ~
when HILIGHT is set ON, input from the keyboard
is high-lighted on the display; when set OFF, input is
displayed at normal intensity. When you log on,
HILIGHT OFF is in effect.
PA2 jFULLt
IHALF5
defines the amount that the activity screen is scrolled
when the
P A2 key is pressed with the cursor in the
input area.
If FULL is specified, the entire screen is
cleared when the P A2 key is pressed. If HALF is
specified, and there is no information on the lower
half of the activity screen, the normal action of
clearing the screen
is performed; if there is
information on the lower half of the activity screen,
the line in the middle
of the output area is scrolled to
the top of the output area
on the screen.
Chapter 7. VM/PC Commands 7-49

IBM Professional Series Specifications

General

Brand	IBM
Model	Professional Series
Category	Software
Language	English