IBM Professional Series - Page 323

No device specified (DMS028E)
The command requires that you specify a device address.
Reissue the command with a valid device address.
No fileid«s» specified (DMS042E)
At least one fileid must be specified for the command
issued. Reissue the command, specifying at least one
fileid.
No filemode specified (DMS223E)
A filemode was not specified in the command line.
Reissue the command specifying a filemode.
No filename specified (DMSOOIE)
The command you entered requires that you specify at
least one filename. Reissue the command and specify the
filename(s).
No files loaded (DMS040E)
You have not previously issued a LOADMOD or LOAD
command to load an executable module. You should load
the required files, and then reissue the original command.
No filetype specified (DMS023E)
The command you entered requires that you specify both
filename and filetype. Reissue the command and specify
the filename and filetype.
NO lOB AVAILABLE (DMK006T)
A Control Program 110 scheduling error has occurred.
NO PAGE FRAMES AVAILABLE (DMK018T)
A virtual storage management error has occurred.
NOSAVEAREAAVAILABLE (DMKOOIT)
A Control Program subroutine call has been issued and
no internal save area
is available.
No user defined FILEDEFs in effect (DMS3241)
No current FILEDEFs exist. Reissue the command
specifying a filemode.
8-20 VM/PC Users Guide