IBM Professional Series User Manual

Insert backup diskette 02 in drive A:
Strike any key when ready
When you see the above prompt, insert VM/PC
Distribution Diskette 5 in drive A and go to STEP 11.
STEP 11. Press any key.
After moving the data on the diskette in drive A to the C
disk, the
RESTORE command prompts you for the next
distribution diskette. You will see:
Insert backup diskette 03 in drive A:
Strike any key when ready
When you see the above prompt, insert VM/PC
Distribution Diskette 6 in drive A and go to STEP 12.
• STEP 12. Press any key.
After moving the data on the diskette in drive A to the C
disk,
the RESTORE command processing is complete.
Go to STEP 13.
• STEP 13. Wait for the following screen to appear:
IBM V M / P C
INS TAL L A T ION PRO C E D U REM E S SAG E
The
VM/PC installation processing is nearly complete.
When you see the standard prompt from DOS,
the VM/PC installation processing will be complete.
2-12 VMjPC Users Guide

IBM Professional Series Specifications

General

Brand	IBM
Model	Professional Series
Category	Software
Language	English