x -The X indicates the computer associated with the
active session
is
not available. This indicator will come
on
for short periods of time whenever the
ENTER
key is
pressed.
Don't
be alarmed.
If
the indicator remains
on
for a long period and no
activity appears to be taking place, there may be a
problem with the computer. Please refer to 'What To Do
if Something Goes Wrong' later in this chapter.
• Inhibit/Insert - The Inhibit indicator is controlled by the
computer associated with the active session.
If
the word
Inhibit
is
displayed, the keyboard
is
locked and input
is
inhibited. This indicator is normally
on
when the X
is
also on.
The word Insert indicates the INS key was pressed and
the keyboard
is
set to insert mode. All data will be
entered
at
the position of the cursor and all data to the
right will be moved to the right. Press INSERT again,
or
the RESET key (or any key that causes communication
with the host system - ENTER,
PA
keys,
PF
keys, etc.)
to
turn off the Insert indicator.
Note:
VM/PC
3277 emulation does
not
require you
to
set nulls
on
before you can insert characters into a line.
n session name - The n session name indicator
is
the
number and name of the active session. The number and
name displayed are the same as the number and name
on
the Session Selection Menu.
4-20
VM/PC
Users Guide
To Next Page
Loading...
Need help?
General
