IBM V7000 User Manual

Chapter 5. IBM Flex System V7000 Storage Node GUI interface 215
5.4.1 Volumes by Pool menu
Figure 5-32 shows the Volumes by Pool window, where you can create or delete storage
pools as well as perform actions on volumes such as mapping to host or unmapping from
host. Also, migration actions can be performed from the Volumes by Pool menu.
Figure 5-32 Volumes by Pools menu
As with the storage controllers, you can rename the MDisk pools to reflect where the disks
are located.
Click here to rename

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities