IBM V7000 User Manual

© Copyright IBM Corp. 2013. All rights reserved. 571
Chapter 13. Maintenance and
troubleshooting
There are many ways to monitor and troubleshoot IBM Flex System V7000 Storage Node.
This chapter describes the following topics:
򐂰 Reliability, availability, and serviceability (RAS)
򐂰 Hardware and LED descriptions
򐂰 Monitoring system status and health
򐂰 Managing IBM Flex System V7000 Storage Node using FSM
򐂰 Configuration backup and restore process
򐂰 Software upgrade procedure
򐂰 Drive firmware upgrade procedure
򐂰 Troubleshooting
򐂰 Audit log navigation
򐂰 Support data collection
򐂰 Using event notification
򐂰 Configuring Call Home
򐂰 Event log navigation
򐂰 Shutting down and power on Storage Node procedure
For more information about how to service, maintain, and troubleshoot the Flex System
V7000 Storage Node, see the IBM Flex System V7000 Storage Node Troubleshooting,
Recovery, and Maintenance Guide, GC27-4205, available from the following link:
http://publib.boulder.ibm.com/infocenter/flexsys/information/topic/com.ibm.acc.493
9.doc/site_bkmap_trblshoot.pdf
13

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities