IBM V7000 User Manual

514 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
The view that opens gives you an overview of the currently configured and mapped hosts
(Figure 12-2).
Figure 12-2 All Hosts view
12.3 Windows host attachment
In this section, we cover Windows host attachment for Fibre Channel (FC), iSCSI and FCoE.
12.3.1 Windows 2012 R2 Fibre Channel volume attachment
The equipment we have for demonstrating volume attachment for a Fibre Channel (FC)
capable server is an IBM Flex System x240 Compute Node running Microsoft Windows 2012
Standard (Version 6.2.9200 Build 9200), two IBM Flex System FC3171 8Gb SAN Switches,
and one IBM Flex System V7000 Storage Node. All are installed in a single IBM Flex System
Enterprise Chassis.
To perform Fibre Channel volume attachment in Windows 2012, complete the following steps:
1. Right-click your Windows 2012 Fibre Channel host in the All Hosts view (Figure 12-3) and
select Properties.
Figure 12-3 Host properties

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities