IBM V7000 User Manual

610 IBM Flex System V7000 Storage Node Introduction and Implementation Guide
Figure 13-33 Event log collected and displayed for network storage resource
13.8.6 Error event IDs and error codes
Each event ID that requires service has an associated error code. See the IBM Flex System
V7000 Storage Node Troubleshooting, Recovery, and Maintenance Guide PDF on the CD or
IBM Flex System Information Center website.for lists of the error event IDs and corresponding
error codes.
Node error codes describe failure that relate to a specific node canister. Because node errors
are specific to a node, for example, memory has failed, the errors are only reported on that
node. However, some of the conditions that the node detects relate to the shared components
of the enclosure. In these cases both node canisters in the enclosure report the error.
There are two types of node errors:
򐂰 Critical node errors
򐂰 Noncritical node errors

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities