IBM V7000 User Manual

Chapter 13. Maintenance and troubleshooting 625
6. Click Next, Review the Summary page and click Finish if all information displayed is
correct, as shown in Figure 13-51.
Figure 13-51 Summary panel for review
13.13 IBM Flex System V7000 Storage Node power on and off
You can shut down only one node or the entire cluster using the IBM Flex System V7000
Storage Node management GUI. When shutting down only one node canister, all the
activities remain active on the partner node; however, when you shut down the entire cluster,
your access to volumes and data will be lost until you manually restart the system.
Follow these general procedures to power on or to power off the system. The procedures
must be followed in the order given. For more information, see the IBM Flex System V7000
Information Center.
http://publib.boulder.ibm.com/infocenter/flexsys/information/topic/com.ibm.acc.com
mon.nav.doc/storage_nodes.html

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities