IBM V7000 User Manual

Chapter 5. IBM Flex System V7000 Storage Node GUI interface 239
5.7.3 FlashCopy Mapping menu
The FlashCopy Mappings menu allows you to create and view the relationship (mapping)
between the FlashCopy source and target volumes.
Clicking FlashCopy Mappings opens the window shown in Figure 5-57. From this window,
you can Start, Stop, Delete, and Rename the FlashCopy mappings. There is also an option to
move the relationship into a consistency group.
Figure 5-57 FlashCopy Mapping window
5.7.4 Remote Copy and the Partnerships menu
Remote Copy and the Partnerships menu are described in detail in 9.3, “Remote Copy” on
page 402.

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities