IBM V7000 User Manual

Chapter 7. Storage Migration Wizard 301
7.2.4 Verifying the disks on the Windows server
Immediately after the Storage Migration Wizard has finished as shown previously, the disks
are available to the Microsoft Windows 2008 Server. You can rescan the disks to get access
to their data again.
While data is still being copied to the destination storage pool in the background, the host can
continue to access the disks and perform its operations normally since the migration is
transparent to the host.
Figure 7-22 shows that the Microsoft Windows 2008 Server now again has access to the
migrated disks. Data is still being copied from the IBM DS4300 disk system to IBM Flex
System V7000 Storage Node as a background process.
Figure 7-22 Windows server with disk from IBM Flex System V7000 Storage Node

IBM V7000 Specifications

General

Model	IBM Storwize V7000
Storage Type	Hybrid Flash Array
Maximum Capacity	1.2PB
RAID Levels	0, 1, 5, 6, 10
Connectivity	8 Gbps Fibre Channel, 16 Gbps Fibre Channel, 1 Gbps iSCSI, 10 Gbps iSCSI
Management	Command-line interface (CLI), Graphical user interface (GUI)
Form Factor	2U
Drive Bays	12
Maximum Raw Capacity	1.2PB
Operating System Support	AIX, HP-UX, Linux, VMware, Windows
Data Reduction Features	Real-time Compression, Deduplication
Drive Types	SSD, HDD
Scalability	Scale-up (drive enclosures) and scale-out (clustering) capabilities